@rickdees78: Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

This happens when trying to download from a host and there is 'to many clients' connected. It gives the warning message and 'okay' box that repeatedly trys to open up and continue to download even though there are to many users.

This specific error happens during that point where one tries to open settings between error warnings and lower the download count to clear the error. When exiting settings, the error box will be waiting. Clicking okay at this point causes the problem and shows the file attempting to be downloaded as 'complete' that ever goes away during that connection but limits the future download spot.

IE: if there were 3 spots available, with the 'complete' there after the error trying to download 4, only two remaining will remain. It's quite annoying. Has been a problem on every build of WinSCP over the past 3-5 years.

WinSCP 6.5.3

Error message:
Invalid access to memory.

Stack trace:
(00C46363) TTerminalItem::Cancel
(000B0F5F) ntdll.dll
(0007ACBA) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

While transering data, I connected to a wireguard VPN. that caused the connection to hang. I then started another item from the queue. It got into a weird state where it completed, but was 0kb. After disconnecting from the VPN, I Tried to click cancel on that 0kb transfer.


WinSCP 6.3.7

Error message:
Invalid access to memory.

Stack trace:
(00B7BC73) TTerminalItem::Cancel
(000B042F) ntdll.dll
(0007AABA) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.3.6

Error message:
Acceso a memoria no válido

Rastreo de la pila:
(00B7B8C7) TTerminalItem::Cancel
(00098E4F) ntdll.dll
(000781B1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.3.4

Error message:
Invalid access to memory.

Stack trace:
(00B7A1A7) TTerminalItem::Cancel
(00098CCF) ntdll.dll
(000781E1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.3

Error message:
Invalid access to memory.

Stack trace:
(00B794A3) TTerminalItem::Cancel
(00087B7F) ntdll.dll
(00074001) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

This happened when I tried to cancel an item that was in the background transfer queue.

WinSCP 6.1.2

Error message:
Invalid access to memory.

Stack trace:
(00D1D6E7) TTerminalItem::Cancel
(00087A7F) ntdll.dll
(000740D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.1.2

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00D1D6E7) TTerminalItem::Cancel
(00097FAF) ntdll.dll
(00076221) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>
ftp with esp8266(ftp):
1. edit text file
2. save - not work
3. manual clear tasks
4. memory error
WinSCP 6.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00D1E523) TTerminalItem::Cancel
(00087A7F) ntdll.dll
(000740D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

@joeyflint: Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21

Error message:
Invalid access to memory.

Stack trace:
(00CF6E6B) TTerminalItem::Cancel
(000974CF) ntdll.dll
(00077751) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.7

Error message:
Accès mémoire invalide.

Trace de la pile :
(00D0318B) TTerminalItem::Cancel
(00087B7F) ntdll.dll
(00074001) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

@rickdees78: Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Error Occurs when trying to cancel a download that that has 'completed' but not disappeared.

The cause of this is done by another error. When attempting to download from an ftp with to many downloads. Say I have 3 downloads set but the server only allows 2 connections from Host. The third pops up an error. If you okay this message, hit settings between the error messages and change the background to 2. The third becomes a greyed out 'Completed' that will not disappear. This prevents any other queued items from starting (the first error), this is the result of the second error when trying to cancel the completed item to restart queues.

WinSCP 5.21.6


Stack trace:
(00D0315F) TTerminalItem::Cancel
(00087B7F) ntdll.dll
(00074001) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.2

Error message:
Invalid access to memory.

Stack trace:
(00CF91E3) TTerminalItem::Cancel
(000980DF) ntdll.dll
(000762A1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.1

Error message:
Invalid access to memory.

Stack trace:
(00CF6F5F) TTerminalItem::Cancel
(00097FCF) ntdll.dll
(000761E1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.1

Error message:
Invalid access to memory.

Stack trace:
(00CF6F5F) TTerminalItem::Cancel
(0008786F) ntdll.dll
(00073EE1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.19.1

Error message:
Acceso a memoria no válido

Traza de la pila:
(00CEC19F) TTerminalItem::Cancel
(000878AF) ntdll.dll
(00073EE1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.19.2

Error message:
Invalid access to memory.

Stack trace:
(00CEC767) TTerminalItem::Cancel
(0009759F) ntdll.dll
(00075CA1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.19.1

Error message:
Acesso inválido à memória

Rastreamento de pilha:
(00CEC19F) TTerminalItem::Cancel
(0008788F) ntdll.dll
(00073EC1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.7

Error message:
无效的内存访问。

Stack trace:
(00CBE017) TTerminalItem::Cancel
(0008627F) ntdll.dll
(00072C01) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.10

Error message:
Accès mémoire invalide.

Trace de la pile :
(00CBFAAB) TTerminalItem::Cancel
(0008627F) ntdll.dll
(00072C01) ntdll.dll.KiUserExceptionDispatcher
Before I had too many connections to an ftp server. I'm not sure it is the reason it appends.

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.10

Error message:
Invalid access to memory.

Stack trace:
(00CBFAAB) TTerminalItem::Cancel
(000A36CF) ntdll.dll
(00090571) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.9

Error message:
Invalid access to memory.

Stack trace:
(00CBF933) TTerminalItem::Cancel
(00088F2F) ntdll.dll
(000743C1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.9

Error message:
メモリのアクセス違反

スタック トレース:
(00CBF933) TTerminalItem::Cancel
(000861AF) ntdll.dll
(00072B31) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.2

Error message:
Invalid access to memory.

Stack trace:
(00CBB7FF) TTerminalItem::Cancel
(0008A63F) ntdll.dll
(00077E9A) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.7

Error message:
Invalid access to memory.

Stack trace:
(00CBE017) TTerminalItem::Cancel
(0006246E) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.6

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00CBD86B) TTerminalItem::Cancel
(00087E3F) ntdll.dll
(000732D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.7

Error message:
Invalid access to memory.

Stack trace:
(00CBE017) TTerminalItem::Cancel
(00087E3F) ntdll.dll
(000732D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.2

Error message:
Accès mémoire invalide.

Trace de la pile :
(00CBB7FF) TTerminalItem::Cancel
(00087D7F) ntdll.dll
(00073221) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.2

Error message:
Accès mémoire invalide.

Trace de la pile :
(00CBB7FF) TTerminalItem::Cancel
(00087D7F) ntdll.dll
(00073221) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15

Error message:
Invalid access to memory.

Stack trace:
(0074AF7B) TTerminalItem::Cancel
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

I sent lots of files (hundreds of thousands, 40+GB). Cancelled midway through. Queue wasn't clearing (was frozen). Tried cancelling again, nothing happened, tried All -> Cancel All. Nothing. Decided to wait. Error popped up.

WinSCP 5.15.9

Error message:
Invalid access to memory.

Stack trace:
(0074CB7B) TTerminalItem::Cancel
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.16.2

Error message:
Invalid access to memory.

Stack trace:
(00CBB827) TTerminalItem::Cancel
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

trying to transfer files to an og xbox. always fails after the first top folder finishes. transfer is the queue stays open, no further transfer is done. canceling the transfer leads to the rror message.

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.3

Error message:
Invalid access to memory.

Stack trace:
(0074C19B) TTerminalItem::Cancel
(00087C8F) ntdll.dll
(00073131) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.3

Error message:
Invalid access to memory.

Stack trace:
(0074C19B) TTerminalItem::Cancel
(00087C8F) ntdll.dll
(00073131) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.2

Error message:
Invalid access to memory.

Stack trace:
(0074BCA7) TTerminalItem::Cancel
(0007E16F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
TCPsendBuf was overloaded on a Virtualizo/Plesk VM and so ssh session failed to establish- now transfer is stuck in queue as completed but not able to be removed (removal attempt causes memory access error).
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.2

Error message:
Invalid access to memory.

Stack trace:
(0074BCA7) TTerminalItem::Cancel
(0008402F) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.1

Error message:
Invalid access to memory.

Stack trace:
(0074AFA3) TTerminalItem::Cancel
(00083FFF) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13

Error message:
Invalid access to memory.

Stack trace:
(006EC48F) TTerminalItem::Cancel
(00088DBF) ntdll.dll
(0006FCB1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(006EC60B) TTerminalItem::Cancel
(0003E08E) ntdll.dll
(0003DEF6) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(006EC60B) TTerminalItem::Cancel
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>

Editing existing file.

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Invalid access to memory.

Stack trace:
(006DF8D7) TTerminalItem::Cancel
(000851DF) ntdll.dll
(00073161) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I will take a look at this issue.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
메모리 접근이 잘못 되었습니다.

스택 추적:
(006C5F3F) TTerminalItem::Cancel
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
Invalid access to memory.

Stack trace:
(006C5F3F) TTerminalItem::Cancel
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>



WinSCP 5.9.3

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(006C572F) TTerminalItem::Cancel
(00045A86) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Invalid access to memory.

Stack trace:
(006C572F) TTerminalItem::Cancel
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Invalid access to memory.

Stack trace:
(006C2AA7) TTerminalItem::Cancel
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.2

Error message:
Invalid access to memory.

Stack trace:
(006C375F) TTerminalItem::Cancel
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
无效的内存访问。

Stack trace:
(00672487) TTerminalItem::Cancel
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Invalid access to memory.

Stack trace:
(00671937) TTerminalItem::Cancel
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

Created new file on remote server, edited and attempted to "save" (upload). No success.

WinSCP 5.7.7

Error message:
Invalid access to memory.

Stack trace:
(00672487) TTerminalItem::Cancel
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

When pressing the Delete button on a completed upload in the queue, the following error appears
WinSCP 5.8.2

Error message:
Acceso a memoria no válido

Traza de la pila:
(006A909F) TTerminalItem::Cancel
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Accès mémoire invalide.

Trace de la pile :
(00671937) TTerminalItem::Cancel
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Invalid access to memory.

Stack trace:
(00671937) TTerminalItem::Cancel
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Windows 10 after its first major upgrade

Downloading on 9 threads from a server very far (600ms+RTT! latency) but with relatively high bandwidth (total 20Mbits/sec)

WinSCP 5.7.6

Error message:
Invalid access to memory.

Stack trace:
(00671937) TTerminalItem::Cancel
(0008A9AF) ntdll.dll
(00077F5A) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Was working on a remote host (over an _unreliable_ long distance wifi link) when the host dropped out and this error appeared when I tried to empty the queue.

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0007C61F) ntdll.dll
(00069E6A) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

I just added a folder for copy from my FTP to my PC (is a folder with 12 folders -for each month- with images from Wordpress).

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

stevefoobar wrote:

I'm sorry but I don't believe I ever received a link for a debug version of your software. I checked my spam folder and it wasn't there either.

I've resent it, removing the "foo bar" from the email address, you have specified in your profile. I hope it gets to you now.

EDIT: The email returned, so it did not work. If I send it to the exact address from your profile, it does not return.

I'm sorry but I don't believe I ever received a link for a debug version of your software. I checked my spam folder and it wasn't there either.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

I placed four files into the queue to transfer while a large batch of files was transferring. I then tried to "Execute Now" each of the four files, to bump them ahead of the large batch. When I did this, the UI requested my login password to the remote SFTP server. I did not have that easily available, so I cancelled each of the four files from the queue as the password was requested for each. After the cancels had been processed, the four items were left in the queue list (shadowed). I then tried to right click and "cancel" each of the shadowed entries from the queue, just to clear the display while other batch processes still active in the queue were running. It was at that point that the error occurred.


WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

I had started a queue transfer (background) session with "transfer files individually" set and "New and updated files only" selected and a max of 7 simultaneous uploads set in preferences. It correctly started the transfer session by first determining that many of the 161 files were older than the FTP site files and didn't need to be transferred before it found the 7 files that did need to be transferred and initiated the simultaneous transfer for those.

I then scrolled through the queue window and saw the files that did not need to be transferred were still listed but were "grayed out" and said "Completed".

I then selected one of them and clicked on the "X Remove selected queue item". This is what caused the error message.

This is repeatedly reproducible.

I hope this helps. This looks like a great piece of software but I've only used it for about an hour so far.

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0007C61F) ntdll.dll
(00069E6A) ntdll.dll.KiUserExceptionDispatcher

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

doubt this one is traceable, but i'll submit anyway, this just happened after a file failed to upload and i tried to clear the queue by pressing the red X on the queue

WinSCP 5.7.4

Error message:
Invalid access to memory.

Stack trace:
(00670B33) TTerminalItem::Cancel
(0005A60A) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher